![ZIPPER MASCHINEN ZI-EWB300-160L Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/zipper-maschinen/zi-ewb300-160l/zi-ewb300-160l_user-manual_3843198021.webp)
OPERATION
21
ZI-EWB300-160L
13.2
Operation
13.2.1
Start electrical support
1.
Turn ON-Off-Switch (1) to Position „I“
2.
Turn switch (1) on the handle to "0" BAS activated /EBS de-
activated.
BAS = Brake assistance if no electronic support is re-
quested
EBS = Electronic Brake: Machine is braked and braking ef-
fect is maintained as long as
- until battery empty
- until EBS is deactivated again
3.
Turn the right-hand control handle (2) to adjust the
strength of the electrical support, the further the handle is
turned counter clockwise (+) the stronger the support.
Note: no activation on electrical support means BAS active
(braking effect noticeable)
Note: If EBS is set to "I", no electric drive assistance in for-
ward or reverse direction.
13.2.2
Machine stopping / parking
1.
Turn ON-Off-Switch (1) to Position „I“
2.
Switch (1) on the handle set to "0" BAS activated.
The machine must be braked by manually by manpower
when used on slopes.
3.
Switch (1) on the handle set to "I" EBS activated
The machine brakes until it comes to a complete stand
still and the braking effect remains active as long as the
switch is set to position "I". Also holds the machine in posi-
tion on slops up to 20%. If the machine is to remain in po-
sition for a longer period of time, first bring it onto level
ground and secure it against rolling away ( chock under
the wheels)..
Note: Braking function EBS requires battery energy, de-
signed for short times only (max. 15 minutes)
13.3
Charger
Charging the battery:
1.
remove battery from battery box
2.
connect the charger to the power supply (socket) 230 V
/ 50 Hz and the charging socket (1)..
3.
battery charging
4.
When the battery is fully charged (display on the char-
ger), disconnect the charger again.
5.
charging status is indicated by pressing button (2) on
the display (3).
Voltage display on battery box system indicates the status of the battery:
Voltage display shows 42 V
Battery capacity 100%
Voltage display shows 35 V
Battery capacity ~50%
Voltage display shows < 30 V
Please charge the battery (too less capacity left)