STORAGE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
24
ZI-COM100-2V5
23
STORAGE
Before storing, clean the machine well, drain off condensation water. Pack the cleaned machine and
store in a dry and clean place.
24
DISPOSAL
Observe the national waste disposal regulations. Do not dispose of the
machine, machine components or operating materials in residual waste. If
necessary, contact your local authorities for information on available disposal
options.
If you purchase a new machine or equivalent from your dealer, the dealer is
obliged in certain countries to dispose of your old machine properly.
25
TROUBLESHOOTING
W A R N I N G
Handling the machine with the power supply or vessel pressure > ambient pressure up
can lead to serious injuries or even death. Always disconnect the machine from the
power supply and bring vessel pressure to ambient pressure before servicing or
maintenance work and secure it against unintentional or unauthorised reconnection!
If you find yourself unable to carry out necessary repairs properly and/or do not have the required
skills to do so, always consult a specialist to solve the problem.
Trouble
Possible cause
Solution
Pressure can no longer be
stored
Valve seals broken
Replace the seals
Engine overheats
low oil level
dirty air filter
Refill oil
Clean or replace the air filter
Compressor runs but
produces no pressure
Clogged air filters
Defective seals
Defective valves in the
cylinder head.
Clean or replace the old air filter
Replace the seals
Replace the valves
Engine will not start
No electricity
Check the connection to an
existing electrical grid.
Let the engine cool down and
then drag the red pressure
switch (on / off)
After reaching the escapes
cut-off pressure
Compressed air through
the relief valve und
Pressure switch to reach
the starting pressure
Leaking or defective check
valve
Check valve is damaged
Clean or replace check valve
insert
Replace check valve
Compressor on frequently
Very much condensate in
the pressure boiler
Overload compressor
Drain condensate