TRANSPORT
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
19
ZI-COM100-2V5
Observe the information and markings on the outer packaging of the processed
materials in accordance with the German Ordinance on Hazardous Substances. If
necessary, additional protective measures must be taken, in particular suitable clothing
and masks must be worn.
Smoking is not permitted during the spraying process or in the working area. Paint
vapours are also highly flammable.
Fireplaces, open light or sparking machines must not be present or operated
Do not store or consume food and beverages in the work area. Paint fumes are harmful.
The working space must be larger than 30 m3 and sufficient air exchange must be
ensured during spraying and drying. Do not spray against the wind. Always observe the
regulations of the local authorities when spraying flammable or dangerous spray
materials.
In connection with the PVC pressure hose, do not use media such as white spirit, butyl
alcohol and methylene chloride (reduced service life)
16.7
Hazard Warnings
Despite their intended use, certain residual risks remain. Due to the structure and construction of
the machine, hazardous situations may occur when handling the machines:
D A N G E R
A safety instruction designed in this way indicates an imminently hazardous
situation which, if not avoided, will result in death or serious injury.
W A R N I N G
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death..
C A U T I O N
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
N O T I C E
A safety notice designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of the
machine. Safe working depends first and foremost on you!
17
TRANSPORT
For proper transport, follow the instructions and information on the transport packaging regarding
the centre of gravity, attachment points, weight, means of transport to be used and prescribed
transport position, etc. Transport the machine in its packaging to the installation site using a forklift
or pallet truck with the appropriate load capacity. Assembled and over short distances, the machine
can also be transported using its wheels: Lift the machine only by its lifting handle. Hold it with both
hands and take care of the weight and your carrying position (Lift the machine out of the knees, to
safe your back for injuries). Now the compressor can be moved through the wheels.