12
Front Hub Bearing Installation
Slide a 6903 30x17 tool onto the Press Tool threaded rod.
Insert the threaded rod through the bearing on the non-drive side of
the hub shell. Slide a second 6903 30x17 tool onto the threaded rod.
Thread the Press Tool handle onto the threaded rod.
Turn the handle clockwise to press the bearing into the hub until it is
hand-tight.
Do not overtighten the bearing.
Remove the tools.
Apply grease to the non-drive side axle bearing race.
Insert the non-drive side end of the axle into the drive side of the hub,
through the drive side bearing, through the hub, and through the
non-drive side bearing. Press the axle into the hub bearing with your
thumb until the axle bearing step fits flush into the bearing.
4
6903 30x17
6903 30x17
5
Klüber Staburags NBU30 grease
6
