13
Front Hub Bearing Installation
Install the wave spring onto the non-drive side of the axle. You may
need a tool to press the wave spring against the bearing face.
NOTICE
Do not scratch the axle when using a tool to install the wave spring.
Apply grease to the following locations on the drive side and non-drive
side axle end:
• Axle front surface (a)
• Axle radial surface (b)
• Bearing front face across bearing seal, inner- and outer ring (c)
Press the end caps onto the axle.
Clean the hub with isopropyl alcohol and a shop towel.
7
8
Klüber Staburags NBU30 grease
a
c
b
9
10
Isopropyl alcohol
Shop towel
