I L L U S I O N
22
Flush, or slightly above the top sheeting.
Sand the tunnel top sheet to meet the nose blocks.
Cowl bottom with front mount.
Glue them so that they are flush (or a little above)
with the top, and a little short on the bottom.
Use medium CA.
Sand the tops flush with the center section top, and
sand the tunnel top sheeting to meet them.
Cowling
The cowling is pretty simple.
It’s important to follow these instructions carefully, as a
mistake in epoxy glass is not so easy to fix.
Remove the cowl bottom and the two cowl mounts.
The two cowl mounts get glued together with medium
CA.
