I L L U S I O N
15
Radio box spacer installed 2 inches from front.
Radio box tongue in place.
Tongue is really a lip…
Draw a line 2 inches from the end of the radio box.
Make sure it’s the end without mounting holes.
Using medium CA, glue the radio box spacer to the
bottom of the radio box, along the line you drew.
Glue the radio box tongue to the spacer with
medium CA. Try not to get any glue under the lip,
as it will interfere with the mounting of the radio box.
The back of the tongue should be flush with the
back of the spacer, and centered side to side.
The tongue is wider than the radio box so that the
front will self center in the hull.
The tongue and spacer serve as the front mount of
the radio box.
The rear is held in place with the two 6-32 screws,
into the blind nuts.
