52
Get more from your Zip NVR with our Free CCTV tips at
ZipNVR.com
PoE Extenders
In-line 1ch PoE Extender
Wall Mount 4ch PoE Extender
•
Supports 10 & 100Mbps
•
100m Max Input & Output
•
Use 2 Units For 300m Runs
•
Can Be Used With Splitters
This small in-line device can extend a network cable run up
to 300 metres. Requiring no additional power source it can
be installed in ceiling voids and cable ducts to create a longer
cable run by simply connecting the RJ45 plugs in and out.
Each extender can be added to an existing 100m run to
boost power and data for another 100m and two units can
be used to achieve an overall 300m PoE network cable run. A
single unit can also be used with a single PoE splitter (models
POE001,002,003 on page 32) to power non PoE cameras over
longer network runs.
Order Code:
POE100
•
Supports 10 & 100Mbps
•
100m Max Input & Output
•
22W Max Total Output
•
15W Max Per Channel
A simple way to extend a network cable run and power up to four
IP CCTV cameras. A cable run of 100m can be extended a further
100m run to add and power up to four 8 Mega Pixel cameras.
The unit is easy to wall mount and no power or additional set
up is required. Suitable for use at the end of a network run as an
“
end span
” unit with additional switches before it in the run and
can also be used with a PoE Splitter for a non-PoE camera.
The unit has a power input rated at 25.5W and can supply up to
22W overall output with a maximum of 15W on any one output.
Order Code:
POE104
