Zip InLine CEX-O Скачать руководство пользователя страница 5

  CEX-O_CEX-U, Maintenance and User Instructions V1.02 

Page 2  

March / 2014

Safety Information

WARNING

• 

 Installation, commissioning and maintenance of this appliance must only be carried 

out by a competent installer who will then be responsible for adhering to all relevant 

standards and regulations.

• 

 The front cover of the appliance must never be opened before disconnecting the 

appliance from the mains power supply.

• 

To protect the appliance, a circuit breaker or fuse must be fitted with a rating suitable for the 

nomi nal current of the appliance.

• 

 The appliance must be permanently connected to the supply through an isolating switch with 
a contact separation of at least 3mm in all poles and be protected by a suitably rated RCD.

• 

The cross sectional area of the connection cable must be appropriate for the power rating and 
location of the appliance. See Technical Data. 

• 

The connecting cable must be adequately secured.

• 

 This appliance must be earthed at all times.

• 

Check that the power supply is switched off prior to electrical connection.

• 

The appliance, its wiring and piping must not be modified in any way.

• 

In case of malfunction isolate the power supply immediately. In case of leaks also isolate the 
water supply. Repairs must only be carried out by Zip Heaters (UK) Ltd or an authorised Zip 
service engineer.

• 

Temperatures in excess of approximately 43°C are perceived as hot, especially by children, 
and may cause a feeling of burning. 

• 

This appliance must not be used by any person (inclu ding children) with limited physical, 
sensorial or mental abilities or failing experience and/or knowledge unless they are 
supervised by a person responsible for their safety or received instructions about how to use 
the appliance.

• 

 When the appliance has been in use for some time, the fittings may be very hot.

• 

If inlet temperature is up to 70°C (eg. fed from a solar supply) mixing with cold water will be 
required to ensure a safe temperature at the outlet. 

WARNING:

Situations that could cause injury to yourself or others.

CAUTION:

Situations that could cause damage to your appliance or other equipment.

NOTE:

Notes, usage tips or additional information.

IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. 

NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT 

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO 

SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. 

 

RETAIN THESE INSTRUCTIONS FOR FUTURE USE.

Содержание InLine CEX-O





















Отзывы: