background image

34

Quick Start Installation Guide

 

807042 v1.02 08.22 HydroTap G5 UltraCare Install Instructions

SECTION 13: Commissioning

•  Empty the hot tank first (boiling models).

•  Select NO if it is not safe to continue.
•  Select YES to continue safely.

13.9 Tank flush

•  Read the on screen information and 

instructions.

•  Touch the green arrow to run.

•  There are two ways to empty the hot tank:
•  Dispense boiling water from the tap using 

the tap safety feature. 

•  OR 
•  Touch and 

HOLD

 the green run arrow  

icon to dispense directly from the  
touch screen display.

•  If choosing to dispense directly from the 

touch screen display, ‘dispensing boiling 
water’ text flashes on the screen while 
holding the button. 

•  After the boiling tank is emptied the  

system progresses to the tank flush screen.

•  If NO is selected (indicating  that it is not 

safe to continue) the screen will prompt 
the user to clear the sink area.

•  Once it is safe to continue select YES to 

empty the hot tank.

•  Note

 For all models, the on screen cycle counter displays the number of 

remaining cycles in the tank flush process. 

•  Monitor the on screen information.

Содержание HydroTap G5 Touch-Free Wave













































Отзывы: