Page 2 of 12
Zip CT2/140, DOMCT1- Installation & operating instructions - June 2015 v1.01
Contents
Safety information ......................................................................................................................................... Page 2
Technical data ............................................................................................................................................... Page 3
Spare parts and accessories .......................................................................................................................... Page 3
General installation instructions ..................................................................................................................... Page 4
ChillTap
®
Extra CT2/140 and DOMCT1 installation instructions ....................................................................... Page 5
ChillTap
®
Extra CT2/140 and DOMCT1 configuration diagram ......................................................................... Page 6
Commissioning .............................................................................................................................................. Page 7
Operation ....................................................................................................................................................... Page 7
Filter replacement .......................................................................................................................................... Page 8
Cleaning and Service ..................................................................................................................................... Page 9
Warranty information and End of life disposal .............................................................................................. Page 10
Contact details ............................................................................................................................................. Page 12
Safety information
Please read all installation requirements, installation procedures and precautions before
installing any Zip product.
Never attempt to install a Zip product without reading all of the applicable instructions.
Installation, commissioning and maintenance of this appliance must only be carried
out by a competent installer who will then be responsible for adhering to all relevant
standards and regulations.
Chilled water appliances must be wired to a double pole switched fused spur with a
minimum breaking capacity of 13 amps and protected by a suitably rated RCD.
Installation must comply with current IEE regulations and any local authority
requirements.
This appliance must be earthed.
Check that the power supply is switched off prior to electrical connection.
The product, its wiring and piping must not be modified in any way.
In case of malfunction isolate the electricity supply immediately. In case of leaks also
isolate the incoming mains cold water supply. Repairs must only be carried out by Zip
Heaters (UK) Ltd or an authorised Zip service engineer.
If the power supply cable is damaged it must be replaced by a Zip service engineer or
a qualified electrician.
The power supply cable must be adequately secured.
Do not remove the appliance cover under any circumstances without first isolating the
appliance from the electricity supply.
This appliance must not be used by any person (including children) with limited
physical, sensorial or mental abilities or failing experience and / or knowledge
unless they are supervised by a person responsible for their safety, or have received
