background image

801621UK G4 Commercial boiling (ambient) User Guide - Jan 2016 - V2.02 

Page 21 of 24

LCD Screen operation - Section G  

Safety

To allow the safety setting to be changed using the 

touch screen

• 

Press the [MENU] button for main menu.

• 

Press the [Settings] button.

• 

Enter your 4-digit password  

and press [Enter].

• 

Press the [Safety] button.

• 

Press button       to allow the     

safety setting to be changed. 

To enable or disable 

the safety lock on the tap

Press button        to select ‘Enable’ / ‘Disable’.

Upon completion all the settings can be protected by dis-allowing any setting 

changes by selecting ‘NO’ on the safety settings screen. 

A

B

C

A

B

To activate the hot isolation 

(Classic and Elite).

 

The 

HydroTap

®

G4 is equipped with a safety mode that allows for additional safety 

protection, if needed.

• 

To allow safety changes, select ‘YES’ on the safety settings screen 

(boiling ambient models only).

• 

To activate, press button       to disable safety lock feature. Then press 

button      to enable hot isolation. 

• 

To de-activate, press button       to disable hot isolation. Then press 

button       to enable / disable the safety lock.

• 

To operate the tap when in hot isolation mode, touch the safety 

lock three times, around once per second, the LEDs will flash. This 

operation confirms de-activation and will remain de-activated for 30 

seconds. The hot isolation can be immediately reset, by touching the 

safety lock three times again, or after 30 seconds of non use the unit 

will revert to hot isolation active mode.

Upon completion, all the settings can be protected by dis-allowing any setting 

changes by selecting ‘NO’ on the safety settings screen (boiling ambient 

models only).

Note

 Do not enable this function when using the Arc / Cube HydroTap.

B

B

C

C

Boiling only models

 

To set the safety lock using the touch screen

• 

Press the [MENU] button for 

main menu.

• 

Press the [Setting] button.

• 

Enter your 4-digit password  

and press [Enter].

• 

Press the [Safety] button.

• 

Press button      to enable / 

        disable the safety lock on

        the tap. 

B

Boiling ambient models 

(Classic and Elite)

B

C

Содержание 801621UK

























Отзывы: