Zionair CP22S8, Инструкция по установке и эксплуатации

Страница: 15 / 32

14
PAY ATTENTION! Before maintenance or repair work is carried out, it is necessary to disconnect the
compressor from the electrical supply because of electrocution danger and fast moving parts!
Regular maintenance
9. Clean the compressor regularly clean with a damp cloth
10. Remove dust/dirt on the inside of the compressor by means of compressed air/air gun.
11. Open the drain valve of the tank regularly to water and oil, if there is a high air humidity, one
needs to run more often this Act
12. Check daily or the oil level is at the right level yet.
13. Clean the air filter (1.2 and 3 parts list) monthly clean/replace it monthly.Controleer bij
intensief gebruik maandelijks de riemspanning en stel deze indien nodig af.
14. Replace the oil after the first 100 operating hours, then after every 1000 operating hours.
When conditions are unfavourable in the workshop (high humidity, etc.) should the oil be
replaced every 500 hours.
15. Regularly clean all parts of the compressor and check them for damage, deformation etc.. If a
part needs to be replaced, please contact your Zionair dealer and please specify the model
number of the compressor and the part number, please refer to the drawing and parts list.