Zio WLB5254AIP/X11, Руководство пользователя

Страница: 44 / 69

X11 Wireless Broadband Router User manual
Page 44 of 69
automatically disconnects the PPPoE session after the WAN connection has
been idle for the amount of time you specified in the timeout box. If your
Internet account is billed based on the amount of time of your Internet
connection, you probably want to enable this option and enter an idle time
value best suitable for your network. To use this option, click the radio
button next to Connect on demand.
Connect to Internet manually : The router will connect to Internet while
click the “Connect” button on the Web. And the WAN connection will
disconnect. If you click “Disconnect” manually from the Web user interface.
The router will not auto-connect to the Internet. To use this option, click the
radio button next to Connect on demand.
z
Click “Apply” to save these settings with the Router. The System will apply
the new settings and start rebooting right away. After reboot, the Wireless
Router will enable these settings with the Router.
6.4.3 Static IP
If you are required to use a permanent IP address to connect to the Internet,
select Static IP.
Figure 34
z
WAN IP Address : This is the Router’s IP address, when seen from the
Internet. Your ISP will provide you with the IP Address you need to specify
here.
z
Subnet Mask : This is the Router’s Subnet Mask, as seen by users on the
Internet (including your ISP). Your ISP will provide you with the Subnet
Mask.
z
Default Gateway : Your ISP will provide you with the Gateway Address,
which is the ISP server’s IP address.