ZincFive UPStealth 2 Скачать руководство пользователя страница 5

Страница: 5 / 74

UPStealth® 2 User Manual | 2

Introduction

Proprietary Information

This document contains information that is confidential and proprietary to ZincFive, Inc. It may not be reproduced,

distributed, or translated in any other language, in whole or in part, without written approval from ZincFive and/or its

associated partners.

Copyright

The user acknowledges that all content included in this document, including the information, data, software,

photographs, graphs, typefaces, graphics, images, illustrations, drawings, designs, icons, written and other material

(collectively, “Content”) and the arrangement and compilation of the Content are intellectual property and

copyrighted works of ZincFive.

Trademarks

“UPStealth®” is a registered trademark of ZincFive. Use of third-party trademarks, brand names, trade names and/or

product names are for informational purpose only and are the trademarks of their respective owners.

Support

Support Contacts

For technical support, please contact a ZincFive support representative:

Support Phone: 888.517.7776

Support Email: [email protected]

Support Website: zincfive.com/support

Returns

For product returns, please contact a ZincFive support representative to obtain a return material authorization (RMA).

ZincFive, Inc.

20170 SW 112th Ave.

Tualatin, Oregon 97062

Save the packaging material in the event a return is needed. ZincFive does not warranty product damage from return

shipping unless it is shipped in approved packaging.

Returns Email: [email protected]

Support Phone: 888.517.7776

Содержание UPStealth 2










































































Результаты поиска

Содержание UPStealth 2

Отзывы:

Похожие инструкции для UPStealth 2

Бренды по названию

Популярные бренды

ZincFive UPStealth 2, Руководство пользователя

Результаты поиска

Содержание UPStealth 2

Отзывы:

Похожие инструкции для UPStealth 2

Бренды по названию

Популярные бренды