Zimmer Z Wave Q, Руководство пользователя

Страница: 35 / 40

Error Messages
Troubleshooting
Disposal
15
Page 24
Empty tank by
water evacuation
pump
In case the software is not able to empty the water out of the device automaticly
after pushing the “empty tank” button in the maintanance software, use the
manual water evacuation pump from inside the SysCart. (see picture above).
•
To access the pump, open the front flap and unlock the four screws in
the front.
•
Please connect the pump with the socket for water filling in the rear of
the SysCart in Figure 3
•
After connecting the pump, empty the tank manually by using the pump.
Troubles during
filling process
The error message below shows the user that the filling process was stopped and
has to be repeated.
Please restart to fill the tank according to chapter 14., if error persists, please
contact the customer service department