Zimmer Z Wave Q, Руководство пользователя

Страница: 17 / 40

Self-Test
6
Page 6
Self-Test
After the device is switched on, the ZWave
Q
performs a self-test, which checks all
internal components.
In the event of a fault, an error message appears.
In addition, an extended function test can be performed as described below.
This test should be performed monthly or if there are any doubts about the viability of
the device.
Note : Before performing the functional test, ensure that the handpiece and foot switch are
connected properly to the device.
Check to see whether the power cable is connected properly to the device and
whether it is connected to the network.
Start Screen
From the Start Screen you get to the foolowing settings