Zimmer Z Field Dual, Инструкция по эксплуатации

Страница: 33 / 47

Error messages/troubleshooting
Disposal
14
Page 23
Error messages
Messages:
Overheating
Z Field
Dual
is a device that generates a magnetic field by applying high current to an
applicator. While the applicator generates heat due to the high current used to generate the
magnetic field, it is cooled by means of cooling oil being circulating inside the Z Field
Dual
applicator. If the applicator is used in a slanting position, the cooling oil will not reach all
areas of the applicator and this may result in injury or cause operation to be interrupted. For
this reason, it is recommended to place the applicator in a horizontal position. If the
applicator overheats, operation will be temporarily suspended and the Overheating message
will be displayed (see 23). If this message appears, remove the applicator from the patient for
a while (do not turn off the device) until the message disappears and the device returns to a
normal state.
Caution
!
It is strongly recommended to place the applicator in a horizontal position.
Lifespan of the cooling unit
Z Field
Dual
uses an oil pump for cooling purposes. This component is a consumable
component with a warranty of 5000 hours. After 5000 hours, the Cooling unit message will
appear (see 24). This is not an error, but a maintenance notification. Touch the control panel
and the device will return to a normal state.
By replacing the component by service personnel, unexpected failures can be avoided.
23
24