Zimmer WWR1000 Series, Инструкция по установке и эксплуатации

Страница: 12 / 16

INSTALLATION AND OPERATING INSTRUCTIONS: Tool changer, pneumatic, WWR1000 series
Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
Phone: +49 7844 9138-0
●
Fax: +49 7844 9138-80
●
www.zimmer-group.de
12
DDOC00291 / 0
EN / 2018-09-1
1
8.3 Loose part presence sensing
► Insert the inductive proximity switch
dp
in to the provided pilot hole
cu
and position or fix using the
corresponding locknuts
dn
.
Æ
You can find more information
on accessories on our website

www.zimmer-group.de
Æ
The inductive proximity switch
can be installed at two positions
cu
in the fixed part
9
.
► The bolt
dq
is the dampening
element of the sensor.
9 Emergency release
If the loose part
bp
cannot be disengaged on
an occasion (e.g. crash), it can be manually disengaged at the following points.
9.1 Plug screw (piston resetting)
► Unscrew and pull out the setscrews
do
completely.
► Screw the emergency pins
dl
in on
both sides in unison, using the tool.
► By screwing in the emergency
pins
dl
, the loose part
bp
can be
removed.
9.2 Plug screw (bolt resetting)
► Unscrew and pull out the setscrews
do
completely.
► Press the stop bolts
dr
inward using
the tool.
► By pressing the stop bolts
dr
inward, the loose part
bp
can be
removed.
cu
do
3p
9
3p
dn
bp
cu
dl
do
dl
do
dr
do
dr
do