6
DDOC001
12 / h
EN / 2020-01-15
Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
+49 7844 9138 0
●
+49 7844 9138 80
●
www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS:
Manual tool changers, HWR series
6. Function
The tool changer is a two-piece machine element. Install the fixed part
1
on a handling system. Install the loose part
3
directly on the tool. The two elements are positively connected using the locking bolts
7
.
The manually rotatable devices
2
and
6
create the required stroke. After being locked, the locking lever
2
is folded
up completely and therefore does not create any interference contours. A fixed part
1
can be operated with as many
loose parts as desired. That significantly reduces set-up times during tool exchanges.
Fig. 1: HWR series tool changer
Fig. 2: Cutaway view of the HWR series tool changer
6.1 Technical data
INFORMATION:
For information on technical data, please visit our website.
This data varies within the series, depending on the specific design.
Zimmer Customer Service is available to provide you with assistance if you have any further questions.
1
Fixed part
2
Locking lever
3
Loose part
4
Robot flange
5
Integrated pneumatic feed-through,
6xM5
6
Interlock cam
7
Locking bolt
8
Mounting surface for the energy element
