DDOC00188
enu / 2016-08-31 / Index a
INSTALLATION AND OPERATING INSTRUCTIONS:
Pneumatic GSI series O-Ring gripper
Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
Phone: + 49 7844 9138-0
●
Fax: + 49 7844 9138-80
●
www.zimmer-group.de
►
Inserting the centering rings prepares the gripper jaws for the installation of
the spread jaw.
Clamping jaws
►
Reduce stroke to the minimum dimension (as described in Chapter 6.3)
►
Position the clamping jaws
4
on the gripper jaws,
•Pins in the direction of the wiper.
•Insert screws into the tapped holes
►
Secure the clamping jaws with strength class 8.8 cylinder screws
• Install the gripper jaws so that they can still be moved manually
• The gripper jaws must lay flush against the contact surface
• The clamping jaw pins may not touch the spread jaws, which will
be installed in the next step
(arrow)
Spread jaws
►
Reduce stroke to the minimum dimension (as described in Chapter 6.3)
►
Position the spread jaws
1
on the centering sleeves and align them. The
gripper jaws must be centered.
►
Secure the spread jaws with strength class 8.8 cylinder screws
4
1
8
