DDOC00188
enu / 2016-08-31 / Index a
INSTALLATION AND OPERATING INSTRUCTIONS:
Pneumatic GSI series O-Ring gripper
Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
Phone: + 49 7844 9138-0
●
Fax: + 49 7844 9138-80
●
www.zimmer-group.de
13
10.
Declaration of incorporation
in terms of the EU Machinery Directive 2006/42/EC (Appendix II 1 B)
Name and address of the manufacturer:
Zimmer GmbH, Im Salmenkopf 5, D-77866 Rheinau, Germany, Phone: +49 7844 91380,
www.zimmer-group.de
We hereby declare that the incomplete machines described below
Product designation:
pneumatic O-ring assembly gripper
Type designation
:
GSI 2
��-
series
conform to the requirements of the Machinery Directive, 2006/42/EC, Article 2g, Appendix VII,b - Appendix II,b, in their
design and the version we put on the market.
The following harmonized standards have been used:
•Basic health and safety requirements: No. 1.1.2, No. 1.1.3, No. 1.1.5, No. 1.3.1, No. 1.3.2, No. 1.3.4, No. 1.3.7, No. 1.5.1,
No. 1.5.3, No. 1.5.4, No. 1.6.4, No. 1.7.1, No. 1.7.3.
•DIN EN ISO 12100:2011-03
Safety of machinery - General principles for design - Risk assessment and risk reduction
•DIN EN ISO 4414
Hydraulic fluid power - General rules and safety requirements for hydraulic systems and
their components
A full list of applied standards is available for viewing at the manufacturer's facilities.
Commissioning of the incomplete machine is prohibited until it has been found that - where applicable - the machine in
which the above-mentioned incomplete machine is to be installed complies with the Machinery Directive (2006/42/EC).
Authorized representative for compiling
the relevant technical documents
Kurt Ross
See manufacturer's address
Rheinau, Germany,
2/1/2016
Martin Zimmer
First name, last name Address
(Place and date of issuing)
(legally binding signature)
Managing Partner
