Zimmer Biomet Persona Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 76

background image

36 |

Persona The Personalized Knee

Surgical Technique

2.5 mm Male Hex Driver

42-5099-025-00

25 mm x 2.5 mm
Female Hex Screw

42-5099-025-25

Persona PS Box Cut
Guide 6-9

42-5099-060-03

Persona PS-CPS Box Provisional
Size 6-7 Right

42-5047-007-12

PS Femoral Finishing
and PS Box Preparation

(cont.)

Technique Tip:

Keep blades against the support

features of the cut guide and femoral provisional to
ensure adequate bone resection. The cut planes (A/P
and vertical) extend below the top of the PS cam.

Technique Tip:

Align the raised bumps on the

exterior side walls of the box provisional with the
grooves in the interior sidewalls of the femoral
provisional.

If a screw was used to provide adjunct fixation, remove
the screw and the PS box cut guide. By hand, insert the
correct-sized PS box provisional into the PS femoral
provisional to assure that adequate bone has been
removed for the implant AND for proper patella
trialing. Separate left and right PS box provisionals
exist for sizes 1–2, 3–5, 6–9, and 10–12 PS femoral
provisionals (Figure 80). The constrained posterior
stabilized (CPS) cut slot must be used if a CPS bearing
is selected. The CPS cut slot may also be used for PS
box resections. Additional information for this product
may be found in the Constrained Posterior Stabilized
(CPS) Surgical Technique (97-5026-072-00).

Technique Tip:

If the appropriately sized PS box

provisionals does not easily seat into the PS femoral
provisional, perform clean up cuts to assure
adequate bone has been removed. Do NOT impact
the PS box provisional. Make sure the PS femoral
provisional is fully seated after inserting the correct
PS box provisional.

Figure 80

«
...
36
37
38
39
40
...
»

Содержание Persona













































































Отзывы:

Нет отзывов

Похожие инструкции для Persona

Бренд: ABB Страницы: 86

Бренд: Olympus Страницы: 86

Бренд: Ultimaker Страницы: 38

Бренд: A&D Страницы: 2

Бренд: A&D Страницы: 176

Бренд: CAMAG Страницы: 40

Бренд: Parker Research Corp Страницы: 4

Бренд: Eastwood Страницы: 20

Бренд: Daihan Scientific Страницы: 43

Бренд: IDEAL Networks Страницы: 60

Бренд: IceCure Страницы: 104

Бренд: IFM Страницы: 175

Бренд: IFM Страницы: 5

Бренд: Mangar International Страницы: 8

Бренд: Malvern Instruments Страницы: 30

Бренд: zarges Страницы: 36

Бренд: Valcom Страницы: 6

Бренд: Vaisala Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды