Zimmer Biomet iASSIST Knee Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 68

background image

54 |

iASSIST 2-Pod Version

Surgical Technique

LED Information

As illustrated in figure 5.1, the pods each have an emplacement for the status/error LED and navigation LEDS. The
status and error LEDs are at the same location and are distinguished by their color and general meaning (green
for the status LED indicating normal functioning of the pods and the system in general and red for the error LED
indicating that an action is required from the user in order to proceed with the surgery.

The navigation LEDs display indication on the resection angles during navigation and on the manipulations needed
from the user in the actual step.

Specific information on the LEDs’ behavior is detailed in the following table.

Status/Error LED

Navigation LEDs Status

Required Action

Pod Power-Up

Blinks rapidly (green)

N/A

The pods are trying to join the system
network for procedure

Wait for the blinking to slow down, indicating
that the network is up

Blinks slowly (green)

N/A

The network is up and ready for the
procedure

Proceed with surgery

Calibration

Blinking green

N/A

The pod needs to be clipped to the
calibration jig for intraoperative
calibration or intraoperative calibration is
over and the pods can be unclipped from
the calibration jig to proceed with surgery

Follow instructions onscreen to clip or unclip
pods from the calibration jig

Solid green

N/A

The pods are adequately clipped to the
calibration and ready for the calibration
process

Proceed with surgery

N/A

Solid green

Indicates the expected calibration jig
position for the intraoperative calibration

Position the calibration jig so that the face
marked with that number is directed upward
and wait for the acquisition to be completed

Registration and Validation

N/A

Blinking green

Manipulations are needed to complete
the registration / validation acquisitions

Use the pattern of the LEDs or the indications
onscreen to perform necessary manipulation

N/A

Steady green

The leg is in the required orientation for
the next acquisition

Stabilize the leg in the actual position until
the registration sound is heard and another
movement is needed

Blinking green

N/A

Successful computation after a sequence
of acquisitions

No action needed. Continue with next step of
surgery.

Navigation

N/A

Blinking red

Resection angle is out of the pod’s range

Use the gold (F/E -Slope) and green (V/V)
screws to adjust the resection angles.

N/A

Solid red

Resection angle is not aligned with target

Use the gold (F/E -Slope) and green (V/V)
screws to adjust the resection angles.

N/A

Solid green

Resection angle is aligned with target

Proceed with surgery

Anytime during procedure

Blinking red

N/A

The pod’s battery level is low: end of life
within the next 30 minutes.

No action needed.

Solid red

N/A

System or pod error

Follow indications on the system controller
display in order to resolve the error

Solid red

N/A

End of battery life

Consider opening a new iASSIST Knee Pod Kit
or switching to conventional instrumentation.

Blinking green

N/A

Everything is working as it should

Proceed with surgery

«
...
54
55
56
57
58
...
»

Содержание iASSIST Knee





































































Отзывы:

Нет отзывов

Похожие инструкции для iASSIST Knee

Бренд: Baker Hughes Страницы: 168

Бренд: Above All Страницы: 4

Бренд: Bang & Olufsen Страницы: 2

Бренд: Bartscher Страницы: 28

Бренд: Bartscher Страницы: 13

Бренд: IBEX Страницы: 10

Бренд: M-system Страницы: 12

Бренд: Cambro Страницы: 6

Бренд: Xebex Fitness Страницы: 15

Бренд: qeedo Страницы: 2

Бренд: Jasco Страницы: 2

Бренд: Pahlen Страницы: 20

Бренд: Paia Страницы: 7

Бренд: PASCO Страницы: 30

Бренд: olympia electronics Страницы: 2

VIMCO Sivoia SV-CCI-GRP

Бренд: Lutron Electronics Страницы: 2

Бренд: DC Med Страницы: 2

TRICEPS EXTENSION

Бренд: ETENON Fitness Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды