Zimmer Biomet iASSIST Knee Скачать руководство пользователя страница 43

Страница: 43 / 68

41 |

iASSIST 2-Pod Version

Surgical Technique

Retrieve Surgical Procedures
Archives

The system controller computer has an archiving
function to retrieve previous surgical procedure logs.

1. Insert a USB key (must be FAT32 or NTFS format) in

the USB port of the system controller computer.

Note:

Password protected USB keys are not

supported by the system controller computer.

2. On the main screen of the system controller

computer, click on the “System Utilities” tab.

3. Click on the “Copy Logs” button.

Note:

The “Copy Logs” button will not be

available until a valid USB key is connected to
the system.

4. The system will copy the logs on the USB key

and will inform the user when the archiving is
successful.

Postoperative Guide

Exit the iASSIST Application

At the end of the procedure, quit the application
before starting another procedure with another pod
kit. To do so:

1. Click on the “Stop” button at the bottom right of

the screen.

2. Confirm exit of the application by clicking “YES”

on the confirmation window that opens.

Warning:

After having scanned the barcode

and powered on the pods, do not exit the
application unless the surgical procedure has
ended. When exiting the application, the pods
will be permanently deactivated and can’t be
restarted.

Содержание iASSIST Knee





































































Результаты поиска

Содержание iASSIST Knee

Отзывы:

Похожие инструкции для iASSIST Knee

Бренды по названию

Популярные бренды

Zimmer Biomet iASSIST Knee, Руководство пользователя

Результаты поиска

Содержание iASSIST Knee

Отзывы:

Похожие инструкции для iASSIST Knee

Бренды по названию

Популярные бренды