Zigmund & Shtain FI-64, Инструкции по установке, использованию и обслуживанию

Страница: 46 / 102

44
Inserting the oven into the cabinet
The cabinet and its components must be capable
of withstanding a temperature of 90°C without
presenting any deformation and/or surface
defects. The cabinet must enable the free
passage of the oven connections. All household
kitchen units must be protected with fire-resistant
material in accordance with the standards in
force.
It is important that all operations relating to
installation of the device are carried out by
qualified staff. The oven can be installed in a
column or below the worktop of a kitchen cabinet.
INSTALLATION CLASS - 3
ATTENTION
Respect minimum ventilation apertures of
the cabinets, as given in the drawings.
ATTENTION
In order to guarantee good ventilation,
the aperture of 80 mm is also recalled
towards the outside of the cabinet and
not only in the rear part, otherwise
application is not compliant..
Fig. 01
Fig. 02
Built-in measurements
The dimensions of the opening to be made in the
cabinet for fitting the oven are indicated in figures.
Make sure that the cabinet where the oven is
installed can support the weight of 30 kg. For
the aperture in the cabinet, follow the respective
dimensions indicated in
fig.01
,
fig.02
for FI-64,
FI-74. In the bottom of the cabinet or in the oven
support shelf, to allow sufficient air to circulate for
the cooling of the oven during functioning.
Use screws A for fixing the oven.