Zigmund & Shtain FI-64, Инструкции по установке, использованию и обслуживанию

Страница: 44 / 102

42
Removing/mounting the sliding guides (if any)
If supplied, you will find running guides installed.
To remove them, release the lateral support
guides as described in the “REMOVAL AND
MOUNTING THE LATERAL GUIDES” paragraph.
Holding the lateral guides vertically on a flat
surface, release the lower part of the runner,
making it turn as indicated in figure 1. At this
point, the runner can be removed completely from
its housing.
Fig. 1
Fig. 2
To reposition the running guide again on the
relevant supports, position the upper attachments
on the rod of the lateral guide, press the runner
downwards in a way that it is tightly coupled and
exert pressure as demonstrated in figure 2 until
the runner is tightly fastened to the support.
ATTENTION
During this process do not rest weights or apply pressure on the lateral guides. The enamel on the
side walls of the oven could be damaged.