Zigmund & Shtain FI-64, Инструкции по установке, использованию и обслуживанию

Страница: 21 / 102

EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
19
Programmer N instructions (model FI-64/74 MTLN)
Switching on
On commissioning, the display flashes and the
time of day starts from 12:00.
Make sure that the left knob is in the off position
and then press the right knob to access the oven
functions.
If the selector is not at off, by pressing the right
knob, a warning signal is activated.
ISetting the time
When the oven is in Stand-by mode, press the
right knob to access the time setting menu (the
time flashes). Turn to the right to increase and
the left to decrease. Initially, the hour increases
or decreases at the first step, at number 6 the
speed increases, the minutes flash indicating that
the time has been set.
After 4 seconds from the last modification, the
menu is exited automatically, the hours and
minutes flash indicating that the time has been
set. After another 4 seconds, press the right knob;
it returns to stand-by.
Right knob functions
Depending on the position of the cooking mode
selector (represented by the left knob), pressing
the right knob allows access to different menus.
When the cooking mode selector switch is off, it
is possible:
- Modify the time;
- Modify the timer;
- Modify the button acoustic signal tone.
When the cooking mode selector switch is on, it
is possible:
- Modify the functions of the oven, except for the
special defrosting and oven light functions;
- Modify the timer;
- Modify the duration of the functions;
- Modify cooking stop;
Method of use
To start cooking, turn the knob to the desired
cooking function (the default temperature is
already set and is shown on the display).
When the selector is in the OFF position, the
display shows the time but the oven temperatures
and programs cannot be selected. In this way,
only the timer is active.
The cooling fan is off when the temperature of the
oven cavity is lower than 110 degrees.