Zigmund & Shtain FI-64, Инструкции по установке, использованию и обслуживанию

Страница: 15 / 102

EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
13
ELECTRONIC PROGRAMMER B (MODELS FI-64/74 MTB-WTB)
Clock
Timer
Oven on
Cooking time
Cooking end time
Decrease num.
Increase num.
A
Automatic
Man
Manual
Safety lock
This programmer functions with touch system,
operate on the commands by exerting slight
pressure in the area indicated by the symbols.
Activation and adjustment of the time
Once the current is connected, the flashing
symbol and 12:00 appear on the display; the
h:min symbol appears.
By touching one of the three symbols SEL
all signals stop flashing. Time adjustment is now
possible. By maintaining pressure constant, the
increase is continuous. After a few seconds the
time is fixed.
Selecting/annulling programs
The programs are selected by pressing the SEL
symbol and scrolling the menu The
Man
symbol
indicates that the oven is in manual mode.
The symbol indicates that the oven is not
performing a program. To annul a program, take
the values set to 0:00.
Manual operation
The programmer must be activated, the Man
symbol illuminated and operation performed on
the knobs. The TIMER function can be used in all
cases.
Semi-automatic operation (cooking
duration programming)
Operate on the SEL symbol until the appearance
of the flashing , numbers 0:00 and h:m
symbol, set cooking duration by operating on the
symbols. The remains fixed and the
symbol, the actual time and the Auto symbol
appear. Turn the knob to the values desired. An
acoustic signal indicates the end of cooking, the
Man symbol starts to flash and the oven turns off.
To stop the acoustic signal, operate on any of the
symbols. Press SEL again to exit programming.
Semi-automatic operation (cooking
end programming)
Touch the SEL symbol until . appears. By