TR640IP
12760-0702-00
Page
3 / 18
www.ziehl.de
1
General Notes
Compliance with the following instructions is mandatory to ensure the functionality and safety of the
product. If the following instructions given especially but not limited for general safety, transport,
storage, mounting, operating conditions, commissioning and disposal / recycling are not observed,
the product may not operate safely and may cause a hazard to the life and limb of users and third
parties.
Deviations from the following requirements may therefore lead both to the loss of the statutory
material defect liability rights and to the liability of the buyer for the product that has become unsafe
due to the deviation from the specifications.
2
Display and controls
1. Display
•
K1 … K4
- white font
=> relay released
- yellow font
=> relay energized
•
coloured bar below the relay name
- bar increasing => delay alarm on active
- bar decreasing => delay alarm off active
- bar flashes red => manual intervention necessary, alarm can be reset (push button
up, or external switch on Y1 + Y2)
-
“M”
=> relay is in manual mode (depending on the colour of the relay
name; relay energized (yellow) relay dropped (white))
-
“T”
=> cyclic relay test active
•
when measured value is highlighted in orange
- sensor value is above the limit value
•
ERR
- There is at least 1 error (detailed description of the active error is shown on page 4)
2. Operating element
– joystick button
3. LED Ethernet connectivity
3
Pre-sets
The pre-set programs cover most applications. The required program can easily be selected via the menu
(
push button down >2s -> programs
). Alternatively, the program can be selected via the web server (
page
configuration
).
1
2
3
