ZIEHL-ABEGG ZAS0, Инструкция по эксплуатации

Страница: 33 / 72

Picture 8.3.1.3.3: Disassembly of the traction sheave
5 Fastening screws
6 Traction sheave
7 Front plate
Picture 8.3.1.3.4: Traction sheave with rear hand guard
1 Cable protection bracket
2 Hex socket screw and hex nut
3 Bolt of the rope protection clamp
4 Hexagon nut
4. Always screw the front plate (7) with three new fastening screws M12 x 35 (5) at the inner hole
circle onto the traction sheave shaft (8). Secure the fastening screws with Loctite 243 or a similar
product.
Do not forget the circlips DIN 6796!
5. Tighten the fi xing screws (5) with a torque wrench with an allen wrench SW 10 uniformly in three
steps:
Tightening torque step 1: 40 Nm
Tightening torque step 2: 60 Nm
Tightening torque step 3: 79 Nm
6. Coat the fastening screws (5) with sealing varnish.
7. Position and tighten the bolt (3) and nut (4) of the rope guard.
8. Fit cable protection bracket (1) with a fl at wrench SW 13.
2ULJLQDORSHUDWLQJLQVWUXFWLRQV
ZAS0 Service & maintenance
A-TBA11_06-GB
Part.-No. 01008051-GB
33/72