7. Tighten the central
fi
xing screw (3) with an allen wrench SW 4
Tightening torque: 5.2 Nm
8. Fix the cover of the encoder (2) with an allen wrench SW 4
9. Adjust the cable outlet by turning the absolute encoder and tighten the clamping screw (1) with
an allen key SW 2 The position of the clamping screw can diversify.
Tightening torque: 1.2 Nm
10. Carry out the alignment of the absolute encoder corresponding to the operation instructions of
the frequency inverter.
8.3.2
Replacement of the traction sheave
Warning!
Due to incorrect mounting the traction sheave can get loose from the drive shaft!
Requirements:
•
Release the traction sheave and put the ropes off the traction sheave.
•
Secure the traction sheave so that it does not jump off the shaft.
The traction sheave is mounted on the power take-off side of the motor (see arrow).
8.3.2.1
Required tools for the replacement of the traction sheave:
•
screw wrench SW16
•
screw wrench gage 24
•
Torque wrench for tightening torque 195 Nm with SW 24
•
5 - 8 mm spacer or hexagon nut
2ULJLQDORSHUDWLQJLQVWUXFWLRQV
ZAtop
–
model series SM225.40B
Service and maintenance
A-TBA13_06-GB
Part.-No. 01009090-GB (
(8%'
)
22/72
