8.3.2.3
Mounting the brake
1. Fasten the cover plate (16) of the micro switch with the hexagon head screw (15) and a screw
wrench SW 16
2. Grease the O-ring (example given Vaseline) and place it in the nut (17) of the brake rotor (13).
3. Ensure that the friction disk of the rotor and the braking surface (18) from the
fl
ansh bearing
bracket of the motor is free of dirt and grease.
4. Push the brake rotor (13) onto the toothed motor shaft (14) with slight pressure.
ATTENTION!
It must be noted that:
SM160.30B:
The installation direction is insigni
fi
cant because the brake rotor (13) is symmetrical.
SM160.40B:
The stepped brake rotor collar (19) must face away from the machine wall.
5. Make sure that the gear teeth engage easily.
6. O-ring may not be damaged.
Service and maintenance
$7%$B*%
Part.-No. 01008166-GB (
EU-BD 845
)
23/68
2ULJLQDORSHUDWLQJLQVWUXFWLRQV
ZAtop
–
model series SM160.30B/40B
