4. Tighten the screw M10 x 25 (4) with the
fi
tting tool until the absolute encoder is loose. Due to the
tightening the screw is pressing onto the central
fi
xing screw (3) and pulls the absolute encoder
off the drive shaft.
5. Screw out the screw M10 x 25 (4) as well as the central
fi
xing screw.
6. Screw the screw M10 x 25 (4) onto the absolute encoder again. Take the absolute encoder from
the motor shaft with the support of the screw.
Caution!
Due the electrostatic discharge the absolute encoder can be destroyed! Do not touch the pins of the encoder
cable as well as the electronics of the absolute encoder!
8.3.1.3
Mounting the absolute encoder
Caution!
Never touch the connection contacts on the position absolute encoder or on the cable! The electronics can be
destroyed by static electricity.
Service and maintenance
$7%$B*%
Part.-No. 01008166-GB (
EU-BD 845
)
18/68
2ULJLQDORSHUDWLQJLQVWUXFWLRQV
ZAtop
–
model series SM160.30B/40B
