background image

COPY

‑A1‑

Sep./12/ 12

Important Notice

Primary kick starter

SUPER HEAD R -148

4-Speed

(4SM-148)

Thank you for purchasing our Complete Engine.

This engine is one of our Engine Complete Series which we have designed and produced by using with years of our experienced product development and manufacturing know-how.

We are proud of that we guarantee customer satisfaction with such a lightweight and high power engine.

Before installing and using this product, please check the contents of the kit, read this installation instructions carefully and understand them completely.

Z50J -2000001

AB27-1000001

1899999

Compatible models

Monkey / Gorilla

Item No.

:01―00―9202

1.

Please Note: Illustrations and photos may vary from actual hardware.

2.

The service and repair information contained in this manual is intended for use by qualified, professional technicians. Any person who does not have sufficient technique, knowledge, proper tools and equipment will never

  

work. Be sure to ask specialty shops or professional mechanics.

  

Poor technique and lack of knowledge may cause the maintenance problems or damage parts.

3.

This product is intended for use ONLY in closed racing course. Never use this product on public roads.

4.

This kit is compatible with the above mentioned compatible models ONLY. Note: Do Not use this product for other models than listed above.

5.

The cylinder length of this complete engine is longer than that of the stock engine.

  

It is impossible to install on stock motorcycle chassis. NOTE: Modification of the chassis is required.

6.

Please note that mainly because of improvement in performance, design change, and cost increase, the product specifications and prices are subject to change without prior notice. We shall be held free and harmless

  

from any and all liabilities or claims for any defects of the parts / the product after installation, and use, and/or any other products/parts.

7.

We do NOT accept any claims due to the parts for racing use only. Except, any requests for the return or repair of goods purchased from TAKEGAWA must be made within one month of receipt of goods against defects

  

in workmanship and/or materials originally caused by ONLY our failure. No returns or repairs will be accepted after one month. However, we DO NOT accept our products which are NOT installed in the right way and/or

  

DO NOT used properly.

  

We are not responsible for any expenses for repair or replacements.

  

NOTE: When you use for racing, we shall be held free and harmless from any and all claims.

8.

These instructions should be retained along with this product.

Engine Complete KIT 

: Spec.SUPER HEAD   R

Содержание 01-00-9202






















Отзывы: