1
General information
Compliance with the following instructions is mandatory to ensure the functionality and safety of the
product. If the following instructions given especially but not limited for general safety, transport,
storage, mounting, operating conditions, start-up, maintenance, repair, cleaning and disposal / recy-
cling are not observed, the product may not operate safely and may cause a hazard to the life and
limb of users and third parties.
Deviations from the following requirements may therefore lead both to the loss of the statutory material
defect liability rights and to the liability of the buyer for the product that has become unsafe due to the
deviation from the speci
fi
cations.
1.1
Validity
This instruction manual applies to:
Recuperation unit of series: ZArec4C 013, 026 and 039
as of software version 4.05
1.2
Structure of the operating instructions
These operating instructions help you to work safely on and with the recuperation unit ZArec4C. They
contain safety instructions that must be complied with as well as information that is required for failure-
free operation of the recuperation unit.
The operating instructions must be kept at the recuperation unit. It must be ensured that all persons
who have to perform activities on the recuperation unit can consult the operating instructions at any
time. Instructions for use in accordance with the German Occupational Safety and Health Act and the
German Work Equipment Ordinance must be provided in addition to the operating instructions.
Keep the operating instructions for continued use. They must be passed-on to all successive owners,
users and
fi
nal customers.
1.3
Target group
The operating instructions address persons entrusted with planning, installation, commissioning and
maintenance and servicing and who have the corresponding quali
fi
cations and skills for their job.
1.4
Structure of operating instructions
The operating instructions have a systematic structure. The order of the individual chapters corre-
sponds to the order of the work steps for
fi
rst time installation of the recuperation unit.
The operating instructions contain the following information:
•
Device description
•
Mechanical and electrical installation
•
Operation and parameterising
•
Start-up
•
Parameter list
•
Diagnostic
•
Enclosure
1.5
Exclusion of liability
Concurrence between the contents of these operating instructions and the described hardware and
software in the device has been examined.
It is still possible that non-compliances exist; no guarantee is assumed for complete conformity. The
contents of this manual are put through periodic reviews. Necessary modi
fi
cations are incorporated
into the next version.
ZIEHL-ABEGG SEis not liable for damage due to misuse, incorrect use, improper use or as a
consequence of unauthorized repairs or modi
fi
cations.
1.6
Copyright
These operating instructions contain information protected by copyright. The operating instructions
may be neither completely nor partially photocopied, reproduced, translated or put on a data medium
without prior explicit consent from ZIEHL-ABEGG SE. Infringements are liable for damages.
All rights reserved, including those that arise through patent issue or registration on a utility model.
Original operating instructions
ZArec4C
General information
R-TBA14_03-GB 1817 Index 007
Part.-No. 00163436-GB
5/64
