ZIEHL-ABEGG Ucontrol PXDM Series, Руководство пользователя

Страница: 87 / 105

Handbook Ucontrol type-lines PXDM
Date 06/04
TBL02_55-GB06/04 Part.-No. 00153239-GB
Page 87 / 105
10.2.6 Intern / Extern Function 6D
¨ Switch over between Set Intern and Set Extern (for mode speed controller 1.01 )
“Set external 1“ under settings must be programmed to OFF
contact at digital input e. g. Digital IN 1 = D1-D1
Set Intern 1 at opened contakt ↔ Set Extern at closed contact D1 Inverting OFF
Set Intern 1 at closed contakt ↔ Set Extern at opened contact D1 Inverting ON
¨ Switch over between aktiv setting at the unit and external Signal (for mode controller higher 2.01 )
Contact at digital input e. g. Digital IN 1 = D1-D1
External Setpoint at 1E for E2 Function
External manual operation at 2E for E2 Function
Setting at the unit at opened contact ↔ Signal Extern at closed contact D1 Inverting OFF
Setting at the unit at closed contact ↔ Signal Extern at opened contact D1 Inverting ON
Signal 40%
Controller
3~ 400 V
3~ 78 % = Intern 1
D1 D1
0 1
0
1
3~ 40 % = Extern
E1
External
Setpoint
Signal 40 %
Controller
3~ 400 V
3~ 0-100 %
D1 D1
0 1
1
0
3~ 80 %
Sensor
E1
E2