9.8
Menu group Info
Info
Menu group Info
Info for mode speed controller
1.01
Frequency
Inverter output frequency.
Motor current
Display of motor current (Metering precision approx. +/-10%)
Input power
Input power display (display available depending on the software version)
Output power
Output power display (display available depending on the software version)
Set external1
Display of the currently active default signal.
The percentage corresponds to the internal actuation of the power component under
consideration of the settings
“
Min. speed
”
and
“
Max. speed
”
.
0 - 100 %
0 - 10 V, 10 - 0 V, 0 - 20 mA, 20 - 0 mA, 4 - 20 mA, 20 - 4 mA
Display:
The device operates at:
Set
“
external1
”
Signal to
“
E1
”
/
“
GND
”
Set
“
External2
”
Signal to
“
E2
”
/
“
GND
”
Set
“
Internal1
”
Menu
“
Set Intern1
”
Set
“
Internal2
”
Menu
“
Set Intern2
”
Info for mode controller
2.01
...
6.01
E1 Actual
Current actual value measured on the sensor 1.
Depending sensor-type in: mbr, m
3
/s, m/s, Pa, %, bar, m
3
/h,
°
C, V, mA, etc.
E2 Actual
For operation with two sensors display for
“
2 actual
”
.
If function not active, display
|
- - - - -
|
Setpoint1
Display of the active target value at which the device operates.
“
Setpoint1
”
Menu
“
Setting
”
“
Setpoint2
”
Menu
“
Setting
”
“
Ext. Setpoint
”
= setting by external signal 0 - 10 V. With activated manual mode the
display constantly changes between actual value and value for manual mode.
Frequency
Inverter output frequency
Motor current
Display of motor current (Metering precision approx. +/-10%)
Input power
Input power display (display available depending on the software version)
Operating Instructions
Fcontrol
–
model series FXDM
Programming
L-BAL-E072-GB 1642 Index 008
Part.-No.
52/105
