8
Programming
8.1
Menu group Setting
Information
•
Factory setting
: Activation by external signal (0 - 10 V / PWM) at input
“
E1
”
(control mode = 0
Controller Setup). I.e. the following settings
“
Set Internal1
”
,
“
Set Internal2
”
,
“
Set Intern3
”
are not
active!
•
The following factory settings speci
fi
cations are not binding, these values can differ depending on
the software version and customer-speci
fi
c pre-setting.
Setting
Setting
Set Internal1
Set Internal1
Setting only in Controlmode
|
4
|
active (
Controller Setup).
Via the inputs
“
D1
”
/
“
E1
”
it is possible to switch to
“
Default Internal2
”
or
“
Default
Internal3
”
(
IO Setup).
Setting range manual speed setting:
“
Min. Speed
”
-
“
Max. Speed
”
Factory setting: 50.0 Hz (
Setting
“
Max. Speed
”
)
Setpoint2
Setpoint2
Setting only in control mode
|
6
|
active only in control mode
|
4
|
, if activated via inputs
“
D1
”
/
“
E1
”
(
Controller Setup / IO Setup).
Setting range manual speed setting:
“
Min. Speed
”
-
“
Max. Speed
”
Factory setting: 50.0 Hz (
Setting
“
Max. Speed
”
)
Set Internal3
Set Internal3
Setting only in control mode
|
6
|
active only in control mode
|
4
|
, if activated via inputs
“
D1
”
/
“
E1
”
(
Controller Setup / IO Setup).
Setting range manual speed setting:
“
Min. Speed
”
-
“
Max. Speed
”
Factory setting: 50.0 Hz (
Setting
“
Max. Speed
”
)
Min. Speed
Min. Speed
(basic speed only when needed)
Setting range: 0...
“
Max. Frequency
”
(
Motor Setup).
Factory setting: 0.0 Hz
Active in every control mode, priority by
“
Max. speed
”
.
Max. Speed
Max. Speed
(speed limitation only when needed)
Setting range:
“
Max. Frequency
”
(
Motor Setup)...
“
Min. Speed
”
Factory setting: 50.0 Hz
Active in every control mode!
Settings by
“
Max. frequency
”
are possible but are not made!
Operating Instructions
Fcontrol Basic
–
model series FSDM2.5..50AM
Programming
L-BAL-E174-GB 1704 Index 005
Part.-No.
23/49