10
Diagnostics menu
The diagnostics menu supplies information about the momentary operating condition of the device.
Diagnostic
32.0
°
C
IGBT temp.
Display of the internal temperature of the power semiconductor.
32.0
°
C
Capacitor
Display of electronics internal temperature.
32.0
°
C
MCU Temp.
Display of the internal temperature of the microcontroller.
32.0
°
C
Output
fi
lter
Only in version with integrated sine
fi
lter.
0 %
E1 Input
Signal height at analog input1
“
E1
”
.
565 V
DC-Voltage
The intermediate circuit voltage without load is the peak value of the input voltage.
In a three-phase supply network with 400 V, an intermediate circuit voltage of ca. 565 V
results. This voltage sinks slightly under load.
330 V
Line voltage
Line voltage peak value.
0
State
fl
ags
Not active in devices with integrated display.
0
Fault
fl
ags
Not active in devices with integrated display.
2
PIN-Accesslevel
Momentarily adjusted PIN-Accesslevel (
Controller Setup).
Operating Instructions
Fcontrol Basic
–
model series FSDM2.5..50AM
Diagnostics menu
L-BAL-E174-GB 1704 Index 005
Part.-No.
39/49