ZIEHL-ABEGG AM-PREMIUM, Руководство по эксплуатации, Страница: 18 / 90

9 Programming
9.1 Speed controller 1.01
9.1.1 Base setup 1.01
Base setup
Base setup
Mode
Mode
Factory setting Mode: 1.01
E2 Analog In
E2 Analog In
Selection: 0 - 10 V, 0 - 20 mA, 4 - 20 mA, KTY, PT1000 (Inverting IO Setup)
Factory setting: 0 - 10 V
E3 Function
E3 Function (only for special applications)
•
Analog input 2
“ E3 function ”
factory set at
“ OFF ”
.
•
For operation with a second signal and switch over via fl oating contact set function
for
“ E3 ”
to
|
1E
|
( IO Setup: function
|
4D
|
).
•
For operation with a second signal and automatic control at the higher level. Set
“ E3 ”
Function to
|
4E
|
.
•
Measurement value = function
|
7E
|
e.g. for limit indication, display in Info menu
“ E3
Actual ”
.
E3 Analog In
E3 Analog In
As long as no allocation has been carried out display:
|
- - - - -
|
Selection: 0 - 10 V, 0 - 20 mA, 4 - 20 mA, KTY, PT1000 (Inverting IO Setup)
Factory setting: 0 - 10 V
9.1.2 Setting for operation 1.01
ECblue
Setting
Setting
Set Intern1
Set Intern1
Setting range manual speed setting: 0 rpm... “ Max. Speed ”
Factory setting: 200 rpm
Set Intern2
Set Intern2
Setting “ Set Intern 2 ” e.g. reduced value for night operation.
Switch over intern 1/2 by external contact (as long as no allocation is carried out:
Display:
|
- - - - -
|
IO Setup).
Min. Speed
Min. Speed
Setting range: 0 rpm... “ Max. Speed ”
Factory setting: 0 rpm
Max. Speed
Max. Speed
Setting range: Rated speed ...0 rpm (takes priority over setting “ Min. Speed ” )
Factory setting: Rated speed
Set external1
Set external1
“ ON ” (factory setting) = speed setting by external Signal
“ OFF ” = Setting “ Set Intern1 ”
Operating Instructions AM-PREMIUM(-W) – model series Programming
L-BAL-E095-GB 1618 Index 006 Part.-No.
18/90