Ziegler CORN CHAMPION K Series, Инструкция по эксплуатации и сборке

Страница: 31 / 52

CROSS-AUGER / IN FEED
31
32. Cross-Auger / In-Feed
Diagram 38
Cross-Auger
The cross-augers are positioned in the section of the chute open-
ings with fastening elements (B). On to these, optionally available
conveying claws can be mounted for the transport of the crop.
The number of required claws (K), respectively the width of the
same can vary depending on the picker model and the width of
the feeding chute of the respective thresher.
The essential issue is that the conveying claws are only mounted
in front of the chute opening.
Diagram 39
Worm/Auger drive up to 8 picking rows
The worm drive is performed from the side opposite to the main
drive. The speed depends on the main shaft of the header and is
therefore predetermined.
Regularly check the tension of the chains and, if necessary,
readjust via the click wheel (S).
Regularly oil the chain.
Clean the protective box from time to time.
Never operate the corn header without mounted and
closed safety guard!
B
K
S