Ziegler CORN CHAMPION K Series, Инструкция по эксплуатации и сборке

Страница: 42 / 52

TROUBLESHOOTING
42
42. Troubleshooting
Hydraulic System
Malfunction Cause Remedy Page
Corn header attachment can
not be lifted Not sufficient hydraulic oil Refill oil 38
Lifting force too low Additional lifting cylinder is required 18
Hydraulic functions of the
header are failing The hydraulic connections have no
flow Check connections /couplings/ screw connec-
tions 21
Hydraulic system does not have
sufficient pressure Check the pressure and increase, if this permis-
sible. Harvester
Manual
Not sufficient hydraulic oil Refill oil 38
Drive System
Malfunction Cause Remedy Page
Drive system is activated but
theheader does not turn Drive shaft Check the drive shaft 20
Drive shaft coupling does not
engage Lock-in has not occurred, check the coupling
halves for complete engagement 20
Coupling does not engage Control the alignment and ensure for free move-
ment of the spline end 21
Header stops during the
deployment V-belt is not tensioned Check the drive system Harvester
Manual
Overload Adjust the operating speed
Cross-Auger
Malfunction Cause Remedy Page
Cross-auger comes to
standstill
Overload Reduce material quantity/ straw ratio is too high
Slipping coupling responds Remove foreign matter and control wipers 29
Drive Check the chain and coupling 28
The original harvester splash plate
mounted in front of inlet chute Remove the splash plate
Auger flings corn cobs out of
the machine Position and number of feed sur-
faces Modify according to the conditions
Insufficient feed Increase the feed rate