Ziegler & Brown ZGIGK, Руководство по эксплуатации

Страница: 6 / 36

6
Installation
•
Do not obstruct any ventilation ports on the body or the hood of the barbeque.
•
The gas cylinder must be kept out of direct sunlight and away from any heat
sources.
•
During a gas cylinder swap or refill ensure that the control knob is in the OFF
position and there are no naked flames in close proximity.
•
Gas hose must NOT be twisted, kinked or under any form of tension. The gas hose
should hang freely with no bends, folds or kinks.
•
No part of the flexible hose should come into contact with any part of the
barbeque that will become hot during operation.
•
A regular inspection of the hose should be made to ensure that it is not cracking,
breaking cutting or deteriorating in any other way.
•
Any damage to the hose requires an immediate replacement from your local
agent or gas expert.
Assembling your Barbeque
Start by unpacking the barbeque, and placing it on a flat surface. Be careful not to damage
the painted finish.
Check that you have all the correct parts, barbeque, cooking grill, grease cup, Allen key,
match holder, cylinder strap.
Remove all packaging materials and dispose of thoughtfully.
Before use, unhook the gas hose from the front right leg and from both back legs.
The gas hose should remain permanently hooked to the front left leg to keep it safely
clear of the hot barbeque.
Only hook the hose back into place on all legs for transport once the barbeque has cooled!