Ziegler & Brown ZGIGK, Руководство по эксплуатации

Страница: 10 / 36

10
For Permanently Installed LPG Supply or Natural Gas Use:
Barbeques which are connected to twin 45 kg LPG cylinders or to Natural Gas must be
installed by a licensed gasfitter, in accordance with the requirements of AS 5601, and local
gas authority requirements.
There are two approaches to installation:
Permanent Piped Connection : Your barbeque may be permanently connected to the main
gas lines or LPG cylinders via copper pipe. This must be done entirely by the gasfitter, in
accordance with requirements of AS 5601, and local gas authority requirements.
Your gasfitter will ensure that your barbeque is permanently connected to the supply
via copper pipe, the gas pressure in the lines is adequate, pipe sizes are correct, all
connections are secure, and that all necessary components (such as secondary regulators
and manual shut offs) are included where regulations require them. Once this is done, the
barbeque cannot be moved. It is a permanent fixture of the property.
Bayonet Point : Alternatively, you can have the gas fitter terminate the gas line using a
“bayonet point”. This allows you to connect and disconnect the barbeque using a special
hose and bayonet termination. Such a hose is provided for the Natural Gas versions of this
barbeque. For LPG installations, an appropriate hose is available through good barbeque
retailers.
Even if your barbeque area already has a bayonet point, you will still need to call upon
a gas fitter to ensure gas pressure is sufficient for your barbeque, and to ensure your
barbeque functions correctly before leaving. Where a gas fitter is required, the gasfitter
must test the safety and operation of the appliance before leaving, including gas pressure,
ignition and burner operation.
Conduct a leak test before use.
•
For stand or cart models do not attempt to connect to the gas supply before the
BBQ is secured properly into its stand or cart.
•
If connecting to a Natural Gas supply, ensure thar the model you have is labelled
“
NATURAL GAS
” and therefore designed to run from Natural Gas.
•
If connecting to an LPG supply, ensure that the model you have is labelled
“ UNIVERSAL LPG” and therefore is designed to run from LPG.
•
Check that all the control knobs (including side burner) are in the
OFF
position
before any attempt is made to connect the hose to the gas supply.
•
Lock the strap provided to a strong point at the bayonet connection point and
hook the eyelet at the other end of the strap to the hook on the rear left leg of the
barbeque. This is to prevent the hose from being able to be over-stretched.
•
Take the bayonet hose that was already fitted to the barbeque by an authorised
person, and connect to the bayonet outlet.
•
Should there be any concern in making the correct connection, please contact
your local Barbeques Galore store.
To the installer : You must instruct the consumer on safe operation, and ensure
these instructions are left with the consumer before leaving the site.