Ziegler & Brown FLAMME, Руководство пользователя

Страница: 18 / 26

18
DAILY OPERATION
USING THE REMOTE CONTROL
You can use the remote control to start the fire and make adjustments to the settings.
SETTING THE TIMER
When the heater is running in either Manual or Temperature mode, press the Timer button.
Keep pressing the Timer button until the desired time period is reached. The minimum period is
1 hour and the maximum is 7 hours. Wait 5 seconds for Timer setting to be accepted.
REFUELING
To refuel, open the hopper and add the desired amount of pellets. The auger will automatically
stop when the hopper is opened. Close the door and the unit will begin firing again.
Note: The hopper lid will be very warm. You should always use some type of hand protection.
NEVER place your hand near the auger while the heater is operating.
POWER OUTAGE
In the event of a power outage, the heater will need to be restarted.
IMPORTANT: Do NOT open the hopper lid or the heater door during a power outage. Open the
closest outside door and any windows to eliminate the home’s natural draft. Wait for power to be
restored and then press the On button to re-start the heater, if necessary.
We highly recommend the use of a surge protector with your unit, as power surges and failures
can affect the operation of any electrical appliance.
WARNING: DO NOT OVERFIRE THIS HEATER. This may cause serious damage to your
heater and void your warranty. It may also create a fire hazard in your home.
IF ANY EXTERNAL PART OF THE UNIT BEGINS TO GLOW, YOU ARE OVERFIRING.
Immediately press the On/Off button on the control panel. DO NOT UNPLUG YOUR HEATER.