Ziegler & Brown FLAMME, Руководство пользователя

Страница: 14 / 26

14
DISPLAY
1. DESIRED ROOM TEMPERATURE
2. ROOM TEMPERATURE
3. HEATING POWER LEVEL
4. SYSTEM STATUS
This will display the current state of the heater.
5. COMPONENT STATUS DISPLAY AREA
There are six components:
i. IGNITER
This is located at the base of the burn pot. Combustion air travels over the hot
igniter creating extremely heated air that ignites the pellets.
ii. COMBUSTION BLOWER
The combustion blower is used to extract the combustion gases from the firebox.
iii. AUGER
The auger is located in the hopper. It is shaped like a corkscrew and pulls pellets
from the hopper and drops them into the burn pot.
iv. CONVECTION BLOWER
The convection blower pushes heated air through the heat exchange system into
the room.
v. VACUUM SWITCH
This switch turns on the feed system when vacuum is present in the firebox.
vi. HOPPER SWITCH
This switch is designed to shut down the feed motor whenever the hopper lid is
opened.
When the component starts running, the corresponding indicator appears.
6. ON/OFF INDICATOR
7. ADDITIONAL CONTROL DISPLAY AREA
8. MODE
9. DATE AND TIME