Zida TX694X Скачать руководство пользователя

Страница: 5 / 54

Overview

Thank You for purchasing our High Performance Mainboard.

Our advanced technology mainboard is designed for processing

speeds of 933MHz or above and is upgradeabled for future

processors.
The VIA Mainboard Utilizes VIA's VT82C694X and VT82C686A

chipset provide an Integrated Bus Mastering IDE controller

with two high performance IDE interfaces for up to four UDMA

IDE devices (hard drives, or CD-ROM's). It's I/O controller

integrates a floppy drive interface, two FIFO serial ports, one

parallel port and one consumer infra red compatible interface.
VIA VT82C694X chipset support Intel Pentium III

FCPGA

eleron

PPGA/FCPGA

or VIA

Cyrix

III processors on socket

370 with 66/100/133MHz processor Front-side Bus. Support

PC100 SDRAM DIMM & PC133 SDRAM DIMM.
The AGP controller supports full AGP V2.0 Capability for

maximum bus utilization including 2X and 4X mode transfers,

SBA, Flush/Fence commands, and pipelined grants. Both

Windows-95 VXD and Windows-98/NT5 miniport drivers are

supported for interoperability with major AGP-based 3D and

DVD-capable multimedia accelerators.
Two DIMM slots support up to 1GB Memory Capacity. Four

USB ports support USB Devices. WAKEUP-LINK Header

supports Intel Wake-On-LAN.
Integrated AC97 2.1 Compliant Codec with 3D Stereo

enhancement (optional). Award 2M bits BIOS, PC99/ACPI/DMI

Compliant.
Baby AT 220mm x 170mm.

Mainboard User's Manual

Page 5

Overview

Содержание TX694X























































Результаты поиска

Содержание TX694X

Отзывы:

Похожие инструкции для TX694X

Бренды по названию

Популярные бренды

Zida TX694X, Руководство пользователя

Результаты поиска

Содержание TX694X

Отзывы:

Похожие инструкции для TX694X

Бренды по названию

Популярные бренды