E
SETTING THE TEMPERATURE (WHEN COOLING OR HEATING)
Adjust the temperature after activating the airconditioner.
To lower the temperature
Press the
H
button - 1 x lowers the temperature setting by 1 °C.
To raise the temperature
Press the
G
button - 1 x raises the temperature setting by 1 °C.
Indication green signal on the unit interior display (applies to type TIN 539):
-
This shows the current and set temperatures.
-
The room temperature indicated may vary somewhat from the current room
temperature. Use it as a reference.
Room temperature indication range 21 - 30° C. The temperature to be set varies
between 16 - 31° C.
Room temperature within indication range:
The set temperature (permanently illuminated light) and the room temperature
(flashing light) are displayed.
Room temperature or set temperature outside the indication range:
-
If the room temperature or set temperature is 31°C or higher, 30°C will
appear on the display.
-
If the room temperature or set temperature is 21° C or lower, 21° C appears
on the display.
Room temperature and set temperature are identical:
-
The corresponding light is activated.
Comments relating to the use of the “HEAT” FUNCTION
•
The effective operation of the airconditioner depends on the outside
temperature.
•
Defrost setting; If the outside temperature is extremely low, the unit
automatically switches to the defrost setting for 2 to 10 minutes. The
operation of the airconditioner is suspended during this period.
•
Pre-heating function; When the timer is ON, the airconditioner measures the
air temperature 1 hour before the set time and activates the unit in advance
if necessary.
REMARKS
G
-
The temperature can be set when using the automatic control function
(except when dehumidifying), but this is not shown in the display.
-
If the ambient temperature is too high, it may occur that the set room
temperature is not reached.
1
1
4
50
