Shanghai Zhaohui Pressure Apparatus Co.,Ltd.
www.zhyqsensor.com
Tel: 86-21-51691919 Fax:86-21-67755185
press "
∧
" or "
∨
" to adjust
“ SV “ value .
Setup completed, press "MODE" button to return to work, or press the "SET" button enter into the fuzzy
control type settings .
4.24 ) the fuzzy control type settings .
In working state, press the "SET" once ,
” PV” shows “ SV ” , then loosen the button .
Press
“ SET “ again for 5 seconds , it will enter into output amplitude high limited value setting , “ PV
“ shows “ OL-U “, then loosen the button .
Then Press
“ SET “ ten times , enter into the fuzzy control type settings , “ PV “ shows “ FUCT “ .
press "
∧
" or "
∨
" to adjust
“ SV “ value .
Setup completed, press "MODE" button to return to work, or press the "SET" button enter into output
adjustment cycle settings .
The functional role:
type 0 adjustment range is big, is suitable for the plate making industry .
type 1 adjustment range is small, be applicable to the silk industry .
4.25 ) output adjustment cycle settings .
In working state, press the "SET" once ,
” PV” shows “ SV ” , then loosen the button .
Press
“ SET “ again for 5 seconds , it will enter into output amplitude high limited value setting , “ PV
“ shows “ OL-U “, then loosen the button .
Then Press
“ SET “ eleven times , enter into the output adjustment cycle settings , “ PV “ shows “ TS “ .
press "
∧
" or "
∨
" to adjust
“ SV “ value .
Setup completed, press "MODE" button to return to work, or press the "SET" button enter into parameters
lock setting .
4.26 ) the parameters lock setting .
In working state, press the "SET" once ,
” PV” shows “ SV ” , then loosen the button .
Press
“ SET “ again for 5 seconds , it will enter into output amplitude high limited value setting , “ PV
“ shows “ OL-U “, then loosen the button .
Then Press
“ SET “ twelve times , enter into the parameters lock setting , “ PV “ shows “ LOCK “ .
press "
∧
" or "
∨
" to adjust
“ SV “ value .
Setup completed, press "MODE" button to return to work, or press the "SET" button enter into the
output amplitude high limited setting .
The functional role:
if lock parameters setting 1 , next time the user enter menu setting need to input
the password .
5.
Safety warning
5.1 ) the controller terminal for the bare installation, when the controller connected with the power , the
body any parts contact the terminal is not allowed
5.2 ) the controller is an open device, please avoid dust, corrosive liquid, high humidity too much or strong
vibration environment use.
5.3 ) when the instrument malfunction, please do not open the instrument without authorization.
